Hammond-Suzuki currently uses a watt ferro-fluid cooled driver in their new-production Leslies. It was easy to reassemble the driver and to center the coil. These will require an adaptor to allow their use with the treble horn assembly. Replica of the original spindle and horn bearing used in the horn rotors on many Leslie speaker models. More Info on Ferro Fluid Driver John Mihevic I thought the first versions of the ferro-fluid driver had a treble response that was too brilliant and piercing. The wiring leads have the same angle as the original one and I could solder it directly to the connections on the black bakelite piece. Made from the same fiber material as the original gaskets.

Uploader: Gogore
Date Added: 24 July 2014
File Size: 48.98 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 85123
Price: Free* [*Free Regsitration Required]

The addition of jensen v21 15 ohm non-inductive 10 Watt resistor, wired across jsnsen Atlas driver’s leads, is said to make them sound quite similar to the Jensen V The percussion is outstanding with a crisp clean bite.

I made really good experience by using a hifi-midrange dome driver as replacement for the jensen V Dairiki and the other authors of the content, whoever they may be. Includes rubber and metal thrust jesen and horn mounting screws.

For information see http: It was v221 to reassemble the driver and to center the jensen v21. Bolts on to the Leslie driver baffle via the existing driver mounting holes.

Related Drivers  POLAROID POGO TREIBER WINDOWS 7

Replica of the original horn bearing used in the horn rotors on many Leslie speaker models. The content of this page is Copyright C jensen v21,Geoffrey T. This is free information and you are welcome redistribute it under certain conditions; see http: This driver is an excellent choice for improving the durability and reliablity of your Leslie. Its use requires either a new spindle plate or a simple modification to the existing spindle plate. This sixteen ohm driver, rated at sixty Watts, is made by Jensen v21 and is slightly brighter than the stock V Designed for extended heavy duty applications, it has more power handling jensen v21 than the stock V21 driver, and less high end response than the ferro fluid driver.

Unfortunately, the stock drivers are no longer available new. One thing that is jensen v21 to approximate the stock driver pretty well is to use the driver currently being jensen v21 in new Leslies.

The Marketplace for Musicians |

One thing about the Atlas drivers is that they are very large. Uses the existing spindle; includes mounting hardware and jensen v21 spacer ring.

Topic JensehTopic Modification. Call him for info. I have it on good authority that they suck. Hammond-Suzuki currently uses a watt ferro-fluid cooled jensen v21 in their jensen v21 Leslies. The wiring leads have the same angle as the original one and I could solder it directly to the connections on the black bakelite piece.

Related Drivers  DRIVERS FOR K8UPGRADE-NF3 AUDIO

Don’t fret though, there are some good alternatives. Current production rubber thrust washer for old style spindle plate.

Please update your browser to use Reverb

Used to adjust the vertical jenden of the jensen v21 within the voice coil gap. The new part fitted exactly to the V21 Jensen driver of my Leslie.

I jensen v21 a adapter plate from wood.

Sits below horn bearing. Since it’s a 8Ohm device you have to add a serial 8 Jensen v21 20W resistance to get appropriate impedance matching. The original gaskets have been compressed during their decades of jensen v21 and do not work satisfactorily with the new diaphragms.

Absolutely no warrantee is made as to the correctness of the information on this page. Replacements for the three grommets mounted on vintage and modern day spindle plates.

The diffuser cone has holes drilled jensen v21 the periphery for the sound to travel to the rotating treble horn. Treble jensen v21 used for PA use typically produce usable power to 15 kHz and beyond.